«SUPER SNAP» - is a modified version of the seal "SNAP" and presents a type of Indicator seal available for sealing objects that do not require the application of a Power-type seal.
Super Snap
Domains:
Colors:
«SUPER SNAP» - is a modified version of the seal "SNAP" and presents a type of Indicator seal available for sealing objects that do not require the application of a Power-type seal.
Order now Request sampleThe advantages of the seal Super Snap:
- Due to its design, the possibility of a repeated application is excluded. The process of installation allows the verification of the seal and the proper application.
- The installation does not require special abilities or equipment.
- The opening without leaving visible traces is impossible.
- The small dimensions and weight of the seal allows the sealing of small objects.
Technical specifications
- Material: polycarbonate;
- The seal consists of 2 segments: body and blocking devices.
- Dimensions: Body – 25х21,5х8,5 (mm); Blocking devices – 22х17,5х5 (mm).
- To install use a cable with a diameter of 0,6- 0,8 mm, of 2 types: of steel or combined nylon wire +stainless cable). The standard length - 250 mm, at the beneficiary’s request the cable can be lengthened.
- Temperature range for normal functioning of the seal: -40°С - +60°С.
- The power to close the seal- not more than 6 kg (by hand).
- Validity period – 5 years starting with the production date.
Marking
The inscriptions may be applied both on the body and on the blocking device – a number of 7 digits and the beneficiary’s logo (purchaser).
Packaging
The deliver can be made in 2 ways:
- Without marking – the body and the blocking device are packed separately.
- Marking – the blocking device is inserted into the body by 2 click (not to the end).
Installation rules
If delivered disassembled:
If delivered semi-assembled:
- Insert the blocking device into the body not more than 2 clicks. To check the orientation verify the position of the holes on the body and on the blocking device
- Pull the cable through the holes of the object to be sealed, and then insert both ends into the holes of the seal.
- Insert the blocking device to the end. The installation is considered finished.
If delivered semi-assembled:
- Pull the cables through the holes of the object to be sealed, then insert both ends through the holes of the seal.
- Insert the blocking device to the end. The installation is considered finished.